Auto hold
Auto hold helps to keep the vehicle stationary after coming to a full stop, allowing you to release the brake pedal.
When the vehicle comes to a stop while automatic creeping is enabled, auto hold will only activate automatically if the necessary conditions are met. When creeping is disabled, the vehicle will slow down gradually until it comes to a standstill. Auto hold is then activated automatically.
Activation of auto hold is indicated by the auto hold activation symbol in the driver information area.
To exit auto hold and continue driving in the selected gear, press the accelerator. If you are in drive, D, or reverse, R, you can also exit auto hold by changing the gear to neutral, N, or park, P.
Note
Switching from auto hold to park
When auto hold is active, your vehicle will automatically switch to the parking gear, P, if you unbuckle your seat belt and either open the driver door or leave the driver's seat.
Conditions
Auto hold is available when you are in drive, D, or reverse, R. You must also have your seat belt fastened and the driver door closed.