Adjusting One Pedal Drive
You can adjust how much braking force One Pedal Drive applies when you release the accelerator.
The available settings are:
| Auto | Releasing the accelerator only applies braking force when you're close to a vehicle in front of you. |
|---|---|
| High | When you ease up on the accelerator, the vehicle will apply braking force until it comes to a standstill. |
| Low | When you ease up on the accelerator, the vehicle will apply less braking force than in the high setting. |
| Off | Releasing the accelerator doesn't engage the brakes. |
Tip
Quick access
A button for adjusting One Pedal Drive is also available in quick controls in the center display when you drive. This allows you to quickly adjust One Pedal Drive without going into settings.
Automatic creeping
By turning One Pedal Drive off, you also enable automatic creeping. This means that your vehicle can move slowly without you using the accelerator.
When automatic creeping is active, you can temporarily pause it by pressing down hard on the brake pedal until your vehicle is stopped. This activates the hold feature. If you want to initiate creeping again, simply tap the accelerator.
There is a limit to the braking force that can be applied by releasing the accelerator when using One Pedal Drive. For hard braking, you need to use the brake pedal.Warning
- Press the vehicle symbol
in the bottom bar and go to Settings. - Go to Driving→Driving dynamics→One pedal drive.
- Select a One Pedal Drive setting.